Tuesday, May 29, 2012

Ammo Application in Gun Function Part 5 of 12


Part 5 Cross dressing your gun--Crossing webbing to create a useful ammo supply systems for your gun—Outside of having a few stripper clips to create a historical effect in your target shooting. If your bolt action gun is your principle weapon it is obvious that you would want it as functional as possible. By now you will probably realize that a stripper clip is an essential part of the equation not just a toy. With this in mind using different supply systems for your gun may not be historically correct but instead of having 30 bullets you will have a battle compliment of ammo to work with. The very neat thing about crossing webbing is the fact that the 5 round stripper clip works perfectly fine in most surplus webbing. We will cover a few examples below but on the overall you should be able to use these supply systems for just about any bolt action military rifle you may own including the Mosin Nagant.

Above are about 100 rounds of 308 ammo on stripper clips. The army surplus pouch was a $1 at a swap meet. The front smaller pouch is useful to hold the empty stripper clips I never drop those. The brass is picked up after shooting and reloaded. This pouch or something very simple like it could be made out of the pants leg from some old blue jeans and some Velcro, this army surplus pouch above is my favorite. End part 5 of 12 To see the next post click here .


If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) Tactics Techniques and Concepts of Anti-armor Warfare historical training manual 2) KFM Fallout Radiation Meter Kit Instructions This is a home made fallout meter developed during the cold war. They knew the public could not get a meter in an emergence so this was designed so anyone could build one with stuff you had around the house.3) US Ammunition Price list from 1912. Not just a neat document but it includes bullet weights and black powder charges for many old cartridges.  To see military e-manuals and gun e-books click here www.firstpatriotpress.com. No waiting, get it now as an E-Book over 70 to chose from!

Anti-armor Infantry Tactics Techniques and ConceptsHomemade KFM Fallout Radiation Meter KitUS Ammunition Price List for 1912

Ammo Application in Gun Function Part 4 of 12

Part 4 Home made clip for the Mosin Nagant



Making a junk clip out of tin cans requires tin snips and a special metal bending pliers for the sharp edges. The can is cut to size and pounded with a hammer to straighten it out a little (it will not become completely flat).

The special pliers are used to make the bends on the outside edge and it is then folded over.


                                   A special paper template is made to allow for mass production. 

After the first bend it is checked against a known factory clip for size. And the next bend is made. Below is a completed clip. This method of loading is the only one that will work with a tin can clip. I would not want to stake my life on this clip. To see the next post click here to see one of my books click my name  Richard W Norman Gun Book Author
 End of part 4 of 12
If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) All American Anti-disarmament Handbook, it is a ammo, gun, supply system in a book  you can make just about anything you might need in an emergency, gun manufacture, repair and ammo production with out loading equipment, three different powders and primers and much more. 2) below is self explanatory and is a operation manual as well as maintenance manual for the gun.3) Salvaging old used brass and how to bring it into a usable condition. To see military e-manuals and gun e-books click here www.firstpatriotpress.com over 70 to chose from. No waiting, get it now as an E-Book! 
All American Anti-Disarmament HandbookBrowning Automatic Rifle BAR 30 CalCleaning and Polishing Brass:Handbook

Ammo Application in Gun Function Part 3 of 12


Part 3 The Russian Mosin Nagant rifle is an example of a gun that uses a stripper clip that is not readily available but you can find them for about $1 each. This make the old gun a pleasure to shoot as it can function as it was designed to. The clips are reusable put the empty clip in your pocket so as not to lose it. There are two ways to load the Mosin Nagant with a stripper clip. One is to place your thumb as far back as possible and push down. The other way is to put the clip in position and grab the front of the top bullet and slide your thumb back slightly lift the front of the top bullet and push down with your thumb. This creates a small lever so to speak and allows you to push in the bullets easier. I made some homemade stripper clips out of a tin can and they only work with the second method mentioned above and were not very reliable. The tin can deformed when using thumb pressure alone. Using the leverage method it worked but was marginal in its success and would cause the tin can clip to jam in the gun on occasion. Real stripper clips would be better! A full complement of clips for this rifle is 6 clips so at $1 each you will not have much of an investment. The webbing for this gun-- webbing is the ammo pouch for this explanation but webbing would include backpacks, canteen holders, gun sling or generally anything used to hold a soldiers gear. For our explanation the word webbing will be limited to the ammo pouch. The Mosin Nagant pouch only holds six clips but having a few extras would be better for storage. You will readily see why the Russian soldier had so few bullets. If you were going to put a people under control of an oppressive government then you would not have a soldier carry to much ammo. If he were hit on the head the opposition would now have a complete battle compliment of ammo to work with. Some army’s battle compliment was as many as 100 bullets depending on the nation and army you are looking at. The Russians could not have that so they made an extremely small ammo pouch which only holds 30 bullets. Owning this Russian ammo pouch with your gun you would want the stripper clips to complete the set, in this way it is a piece of history as well as useful at target practice or at home if you do not have a handgun.

The above Mosin Nagant pouch will go on your belt and is very functional it holds 30 bullets. End of part 3 of 12 to see the next post click here
To see one of my gun books click my name  Richard W Norman

If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) AK47 operators manual all the army thought a soldier needed to know 2) Arasaka Rifle some of the history as well as information on some models you should not shoot 3) Gun Reloading Equipment a Buyers Guide the very least you would need to buy. To see military e-manuals and gun e-books click here www.firstpatriotpress.com. No waiting over 70 to chose from, get it now as an E-Book!
AK-47 Operator Manual for Assult RifleArisaka Rifle 7.7 & 6.5 JapaneseGun Reloading Equipment: A Buyer

Ammo Application in Gun Function Part 2 of 12


Part 2 Clips                 
The M1 Garand and M95 Steyr are the exception to the term clips a clip is generally a short reference to the word stripper clip. The M1 Garand has a clip that is an integral part of the gun. The clip holds 8 rounds of ammo three more bullets than our WWII opponents German 8MM Mauser, or type 99-- 7.7  Japanese Arisaka, or the Garand eight rounds to the six rounds Italian Carcano, giving the Garand  a tremendous advantage for its time on the battlefield. When the last bullet is fired out of the Garand rifle the clip pops out from the top. The Steyr drops the clip out from the bottom.   Except the two exclusions the M1 Garand and the M95 Steyr (generally speaking --there may be a few rarer guns in this category) a stripper clip is not an integral part of the internal working of the majority of military guns. This does not mean that a stripper clip is not important to a gun or gun owner however.  
Stripper clips make all the difference in the world in combat. Take your normal bolt action hunting rifle for example. These guns must be loaded one bullet at a time which is ok for hunting purposes. Most military bolt action guns of a newer make (when we say newer we mean WWI& WWII bolt action guns) have a specially designed notch which allows them to use a stripper clip. It pays to own a few stripper clips for whatever rifle you own as it is the difference allowing you to load 5 or 10 bullets in your military rifle as fast as most people load one bullet in a hunting rifle. This statement is made without the least exaggeration.



  
Surplus military clips from a gun show above are a hodgepodge of different manufactured clips of the same design. The bullet is used to release the spring, the spring is slid out and then the rust and dirt is attacked with steel wool and oil then wiped clean and reassembled.

    No they are not perfect but they are clean and just as functional as new clips at a fraction of the price. I do not sell mags or clips and have no associations with people who do, nor was I paid to write this article.  But a good source for the above clips for your gun from a new manufacture are the M 14 clips for 308 caliber sold by K and K Surplus at 10 clips for $5 at the time of this printing. Item #3202 www.kandksurplus.com (These should work in the guns we are describing and look like the clips above but as mentioned you would be getting new clips).  Some people are attempting to sell one rusty stripper clip for $5 each on the internet. K and K also had 50 packs of caliber 223 strippers for $8 item #WA-223-50-STR and AK47 loaders as well. K and K is not the cheapest on everything. From other sources SKS strippers are $7.50 for 20 on Amazon with no shipping charges and the 7.62X54 strippers are about 45% cheaper from other sources too at the time of this printing so I would not go to  K and K for those. End of part 2 of 12 To see the next post click here to see one of my gun books click my name   Richard W Norman


If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) Developed in a simpler time Small Arms Defense Against Air Attack 2) Because of surplus import back stock military ammo that rusts gun barrels with corrosive primers this manual was written. How to clean the gun and stop the attack on your gun. 3) Gun Control and ammo and gun storage and burial To see military e-manuals and gun e-books click here www.firstpatriotpress.com . No waiting, get it now as an E-Book over 70 to chose from!

Small Arms Defense Against Air Attack TC23-44How to Clean Gun after Corrosive AmmoGun Control and Gun and Ammo Storage and Burial

Ammo Application in Gun Function Part 1 of 12


Part One This tutorial will cover  Gun Clips, Stripper Clips, and Webbing to hold clips, looking at Magazines, and Magazine springs, and speed loaders. Photos and instructions on salvage are included.
Some people are buying guns that had never planned to own one. When asked why they say I want one in case guns are taken away. Some basic information could be critical to how to use a gun to its best advantage. Homemade tin can clips will also be discussed. 
The supply system to a gun determines the usability of a gun. The quicker a gun can be loaded the faster the response. When people think about a bolt action gun they think of hunting rifles and military surplus bolt action guns as being in the same ball park. Even the old bolt action surpluses guns can be used with great effectiveness against superior guns today. Looking at the loading system of military rifles, some time ago, in talking to one man, he had a SKS rifle but did not like it much as he had to load the gun one bullet at a time. When I mentioned that the gun used a stripper clip to load with he said “what is that”. He owned perhaps one of the most formidable battle weapons of its time and did not know how to load the gun. I am not insulting any ones intelligence-- people are rushing into guns for fear that the government may become oppressive. Many years ago I felt the need for a gun for my family’s safety and I too was ignorant about guns. People need simple information to enlighten them on what they own and how to use it. The following instructions and photos will be useful. Just because you own an old surplus bolt action gun it does not mean it is in the same the league as a deer rifle. The surplus gun stands above. A deer rifle has its plusses yes but a surplus military weapon from any war was built to go toe to toe with the enemy. For historical target shooting having the ability to speed load your gun is 99% of the fun. For self-defense for your home of course a handgun would be first choice for convince and immediate presentation but not everyone owns a handgun. In the exchange of fire with a rifle in your home your old military gun is no slacker. In that case I would rather have a military rifle over any deer rifle ever made. For the first five shots they would be equal but that is where comparison ends. If you have a small clip pouch on the sling you are back in business after the first five shots. For home defense with an intruder in another room, after appraising his general location and the locations of residents and neighbors you can start making holes in walls. Even a cinder block house would not deter many bullets from a high powered rifle. The purpose of this article is to help you realize the formidable difference and present an inexpensive viable solution to make your surplus gun usable as it was intended to be. End of part 1 of 12 To see the next post click here

If they pass laws against guns then you will either make your supplies at home, salvage or do without. American Handbook on Guns Ammo and Freedom 

Monday, May 7, 2012

People get what they deserve

  Character in a good man or woman is the measuring stick of his or her life; a vote is like a gun it is only used well depending on the character of the man or woman wielding it. Richard W Norman


If they pass laws against guns then you will either make your gun supplies at home, salvage or do without. Below American Handbook on Guns Ammo and Freedom, it is a ammo, gun, supply system in a book  you can make just about anything you might need in an emergency, gun manufacture, repair and ammo production without loading equipment, many different powders and primers and much more. It is an operation manual for functioning arms manufacture as well as maintenance manual for the guns. You can also salvaging old used brass and how to bring it into a usable condition without loading equipment. 553 pages
American Handbook on Guns Ammo and Freedom 

Wednesday, May 2, 2012

Cleaning rod made from reflector pole.


Coming up with some of the nicer goodies can be expensive when it comes to gun accessories. This is a street side fiberglass reflector pole. Without the reflector it is about $2. The handle was made from a cheap screwdriver that was heated just enough to pull out with pliers yet not enough to scorch the plastic.
Duplicating the patch tip with drill bits and pin files. Pick a bit that fits inside the cleaning tip.


The file was loaded with chalk so as not to clog it with the fiberglass.

File both sides flat but taper the back.

 Drill two holes.

 Use pin files to make the groove.

Nearing completion.

  Heat metal screw driver.

    Pull screw driver out with pliers.
                                               
 A drill bit a little larger than the fiberglass rod was chosen
 to clean out the screwdriver handle shaft hole.
  

                      
Then I used a very small drill bit to pepper the inside of the screw driver handle hole with irregular pot marks approximately 1/8 inch deep so the epoxy would have to fill in these gouges. The back end of the fiberglass shaft was temporally inserted and removed and roughed up with sandpaper and finally received a few file strokes. The metal screwdriver part was used one last time to mix the epoxy and apply it in the screw driver handle hole and then the cleaning patch hole and end was coated with a small amount of epoxy. A larger screwdriver handle could have been used but the larger hole would have required supporting the fiberglass rod to keep it straight until it dried.  The fiberglass rod can be made as long or as short as you want. If you mess up on the end then cut it off and start again. I left my rod full length. Richard W Norman 

 If they pass laws against guns then you will either make your supplies at home, salvage or do without. American Handbook on Guns Ammo and Freedom