Tuesday, May 29, 2012

Ammo Application in Gun Function Part 12 of 12

These 12 posts were posted when the blog was new so they were placed in order.  The 12 posts show photos and instructions on magazine function and salvage. The last post before this one #11 was on bullet shape and gun clip feeding and function so this one is a small section on gun storage. Guns are generally only worth something if they are loaded and child safety is critical. Our family rule always was that a child can see a gun anytime they want if they ask me and they can go shooting any time they want if given a small amount of time to plan for it. This works with the vast majority of kids but if you have a kid this douse not work on you already know from his or her general behavior that you will need to keep the gun locked up. When I would be cleaning a gun I would always ask the kids if they wanted to see it and eventual the response would follow "that's boring". We took them out to shoot shaving cream cans, milk jugs with collared red dye and explained very well what would happen if the gun went off and someone they loved was hurt. We found that Pandora's box was more of a temptation with forbidden fruit than available fruit. Perhaps my kids were different. The general consensus by most is to keep the gun locked up.  Perhaps that would be best! Some say keep the gun unloaded or use a trigger lock. In a critical moment their may be no time to make the necessary preparations to shoot the gun so you may be stuck with a $400 gun shaped hammer to hit the intruder with. A side note some kids have saved their parents because they knew how to use the gun and could get to it when their parents could not. A semi-auto was chosen as our self defense gun because we always left the safety on and second the chamber was left empty. Though not fool proof a small child would generally not have the body strength to calk the gun and second they would have to knock the safety off before the gun could be fired. To start at the first post on ammo application and gun function click here On the side bar you will find a wealth of information on guns, reloading bullet casting and making gun products that will save you a good chunk of change and much, much, more I hope you enjoy the sight.
If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) Developed in a simpler time Small Arms Defense Against Air Attack 2) Because of surplus import back stock military ammo that rusts gun barrels with corrosive primers this manual was written. How to clean the gun and stop the attack on your gun. 3) Gun Control and ammo and gun storage and burial To see military e-manuals and gun e-books click here www.firstpatriotpress.com . No waiting, get it now as an E-Book over 70 to chose from!

Small Arms Defense Against Air Attack TC23-44How to Clean Gun after Corrosive AmmoGun Control and Gun and Ammo Storage and Burial

Ammo Application in Gun Function Part 11 of 12


Part 11 of 12 Bullet shape and your magazine in semi-auto pistols and rifles—Many people want: hollow point, semi wad cutter ammo which is almost flat with a steep sloping shoulder or some other defensive ammo etc. of a peculiar shape or nature. This is all well and good, but, ammo is no good if it will not shoot or function in your gun. You need to fire a couple of boxes of ammo through your gun to see if it works well. If it does fine if not then it is time to look for another type. Without buying a lot of expensive ammo for self-defense a good combination is to alternate in your gun between hollow point for stopping power and hard ball for deep penetration. Hollow point, Hard ball, Hollow point, Hard ball etc.
Revolvers and Speed loaders are gun specific and will be labeled as such. Outside of seeing the obvious difference between a 5 and 6 round speed loader the speed loaders are generally cataloged to brand of gun and frame type of a gun. The most difficult ammo to use is wad cutter ammo as in a stress situation even a policeman will not get all the bullets in his or her gun but many of them will fall on the ground unused. Load the first 5 or 6 bullets in the gun (depending on the revolver type and number of bullets it holds) using wad cutters. The speed loaders should be loaded with a round nosed lead bullets. This will offer you the first shots as a very good bullet followed by the bullets of the speed loader where the lead round nose will deform and bounce on impact. End of part 11 of 12  To see the next post click here

 If they pass laws against guns then you will either make your supplies at home, salvage or do without. You can now have a library of such books that will fit on a CD or flash drive for a small investment. Why not? Below 1) How to peaceful exit a potentially deadly situation as well as gun use. 2)Homemad sheet metal brake. This tool was manly designed as a homemade clip factory but was placed in the book below as a hobby tool for bending metal. 3) below is self explanatory and is a operation manual as well as maintenance manual for the gun To see military e-manuals and gun e-books click below. No waiting, get it now as an E-Book! You can now have a library of such books that will fit on a CD or flash drive for a small investment. Why not? If they pass laws against guns then you will either make your supplies at home or do without.
To see military e-manuals and gun e-books click here www.firstpatriotpress.com. No waiting over 70 to chose from, get it now as an E-Book!

   Combat Handgun Tactics Building the Sheet Metal BrakeM16 Rifle Manual of Operation for 5.56mm

Ammo Application in Gun Function Part 10 of 12

Part 10 Magazine springs—A gun should never be left permanently loaded especially semi auto pistols. The reason being is the spring begins to compress and the gun will not feed as well. For this same reason a gun should never be left in the cocked position when placed in storage as the firing pin spring will lose its tension. On guns where you want it for self-defense it is best to have more than one magazine. You also need an event to help you remember to unload a mag and let it rest. I was taught this example. Each month as you go to the store to buy eggs, this is about 30 days for most families. As you go to the refrigerator to put the eggs away stop and go switch magazines. One magazine is empty and the other is full. Take the full ammo mag out of the gun empty the bullets and load the empty mag and put it in the gun. And let the other mag rest. This only takes a few moments your food will not spoil and your gun will be more functional for years to come. If you decide not to do this then you have several choices. First own extra mags and keep them unloaded buy an extra mag spring (or springs) if it is available for storage. The gun should be shot every six months and as soon as it shows signs of being unreliable switch the spring or rotate out the clip. The second choice is to only load the gun with a few bullets. The average fire fight is only 2.5 rounds. Are you willing to bet your life on the averages? End of part 10 of 12 to see the next post click here.

If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) How to Buy a Used Handgun Many people would like to buy a use gun this discuses the ins and outs on evaluating a used gun and how to determine if it is working as it was designed to work 2) Military Karate/Tae-Kwon-Do trainingh manual3) Very interesting historical document on old stile urban combat. To see military e-manuals and gun e-books click here www.firstpatriotpress.comover 70 to chose from. No waiting, get it now as an E-Book!
How to Buy Used Hand GunKarate Tae-kwon-do Hand to Hand FightingOrganize an Attack in Urban Area

Ammo Application in Gun Function Part 9 of 12


Part 9 Steel magazines—It would pay to describe correct production of a magazine so you can be aware of poor construction. The magazine body is first produced out of a good quality high carbon steel and then the jaws are shaped to the proper position. The body is then heat treated which makes it harder and after cooling depending on the method used it is then lightly heated to relieve stress in the steel. The lips are again checked by quality control and the mag is then blued and assembled with good parts and sold.
Poor quality magazines are made of shoddy, soft, low carbon steel and many times receive no heat treatment or if they are heat treated the steel has so little carbon the lips will not hold their position. Parts are run through as cookie cutter assembly line and the clip only receive a superficial inspection during construction of the multiple parts if it is inspected at all. The clip is assembled with as few spot welds as possible to hold the mag together and has a poorly constructed follower. There is little or no quality control and some magazines are even warped and sill reaches the consumer in an unusable condition. In some cases the spring is poorly heat treated and it too may have problems eventually. The follower that pushes the bullets are mostly cast plastic and many times misshaped and have hollow spots in the cast plastic and should have been rejected during assembly but were not.
To choose a company to buy an ammo mag from, go on the internet and look for reviews that give complaints, do your homework. The Ishapore replacement mag is a good example without naming a company people are complaining that the feeder lips soon deform because of the soft steel and the gun is not functional. The Ishapore is a very fine gun but because of the years of parade and drill practice the clip was removed so many times that the holding notch wears off the magazine somewhat and the clip falls slightly lower and will not pick up a bullet when the gun bolt is functioned. This notch needs to be lengthened. An epoxy glue is a good temporary fix and probably more than sufficient for the casual shooter. If the gun works the glue will allow you to calculate for the weld if you want it fixed permanently. This weld must be performed with a Tig welder by a professional.  A good welding shop can do that for about $25. Take the mag apart so the weld will not soften the spring. Unrelated to the mag in the Ishapore is bolt ware where the bolt was functioned so many times that it falls down in the rear position and on the forward stroke misses the bullet. In this case you must lift the bolt before the forward stroke in order to strip a bullet from the mag and chamber a bullet.                           
Permanent box magazines—These Fixed box magazines are made as part of the gun and you cannot remove them unless the gun is taken apart. These guns can be loaded one bullet at a time like a hunting rifle. Which makes them no better than a hunting rifle. However if you get the stripper clips for the gun even a bolt action rifle is suddenly made more responsive.  
A clip or stripper clip is a marvel and is a marriage between a device and a gun that makes a gun more functional. No matter which surplus military gun you own, you will never appreciate the original function of your gun without them. You will appreciate how the gun worked originally and battlefield response of the weapon you own. For target shooting, loading is simplified—even owning a few stripper clips allows one person to load a clip while the other shoots. Many people want a matching set of stripper clips to their store of ammo.End of part 9 of 12 To see the next post click here

 Richard W Norman
If they pass laws against guns then you will either make your gun parts, bullets and supplies at home, salvage or do without. There is a gun and ammo supply system in a book “AmericanHandbook on Guns Ammo and Freedom”. This is a Book on home gun construction and repair, powder, primers; and a brief history of how the USA has moved toward socialism and their written plans to overthrow our freedom and some solutions to save the Constitution.

Ammo Application in Gun Function Part 8 of 12


Part 8 Some people say the down side of the SKS is the fact that it does not have a detachable magazine. On the AK you must take an empty mag and use an adaptor and then a stripper clip. Small parts like the AK stripper clip adapter get lost in a fire fight so you better have a few extras in case you drop one. On the SKS the stripper clip fits in the gun no extra parts. People buy the aftermarket 20 and 30 round mag’s for the SKS which function reasonably well but the mags are not built with the needed attention and quality control for a military weapon. Many of the aftermarket steel mags do not have enough spot welds and can separate.
This SKS mag is connected by only two spot welds on each side; there is room for at least 3 more spot welds in this most critical location. In a stress situation a good bump and this mag is toast. For sporting activates such a clip would be fine but in an emergency would you bet your life on it  

The SKS should be left alone for best results as replacement stocks are generally designed to only accept the stock makers magazines. Most of these mags are also made of plastic. Some of the mags will break if the bolt is not open when you try to remove the mag. Some replacement stocks will not accept the original factory mag so the mag jams the bolt open and the mag rattles around causing ammo jams as well. Some replacement stocks will not function with any mag except the one designed by the stock maker. Finally the plastic mags ware out. The plastic lips get thin and the lips eventually brake.  Some people will sell or throw away the old wood stock and find out too late that the gun is no longer reliable and will offer an even trade of their expensive plastic stock for an original wood stock. The SKS works best as it was designed! If you want to see a lot of different plastic stocks for the SKS go to a number of pawn shops and those SKS’s are there many times because they do not work well as they were adapted to a very nice looking poorly designed plastic stock. The best mags for the SKS are the 20 round fixed box mags shipped into the country some number of years ago. Most were made in China for the SKS during the war in Vietnam and they use two 10 round stripper clips. People who have them do not sell them and no more have been imported or made for import which is a shame. End part 8 of 12 To see the next post click here.
  Richard W Norman 

If they pass laws against guns then you will either make your supplies at home, salvage or do without. Below 1) How to Buy a Used Handgun Many people would like to buy a use gun this discuses the ins and outs on evaluating a used gun and how to determine if it is working as it was designed to work 2) Military Karate/Tae-Kwon-Do trainingh manual3) Very interesting historical document on old stile urban combat. To see military e-manuals and gun e-books click here over 70 to chose from. No waiting, get it now as an E-Book!
How to Buy Used Hand GunKarate Tae-kwon-do Hand to Hand FightingOrganize an Attack in Urban Area

Ammo Application in Gun Function Part 7 of 12


Part 7 clips continued  The 8MM Mauser any old cloth will do
The 8MM Mauser uses a different stripper clip but the same webbing seen part 6 will work.

Surplus 8MM Mauser ammo in a bandolier. Though the buttons can be unbuttoned they were most probably ripped off so it could be used quickly. The US bandolier has a connected strap to sling over your shoulder not to be tied on as this one. The US model had no buttons but was designed with a fold over that allows you to pull the clip out. Simple Yes! But a most effective, inexpensive, disposable ammo delivery system. Such items could be homemade and provide a good storage system for a rainy day.     
AR15
No time will be spent here on this gun but the mags can be reloaded with a stripper clip arrangement as well. The ammo pouches and other stuff are readily available as military surplus unlike the guns mentioned above where you will have to hunt for the stripper clips. 
  
AK 47 and SKS





  
   Loaded SKS
         The SKS above with a fixed box magazine has its own speed loader built in and with a little practice you can load 10 bullets like lightning. It has a distinctive “Zip” sound when it is done correctly. There is an adapter which allows you to load AK47 magazine with this same stripper clip. As with any gun the AK is useless if you load the ammo in the empty mag one bullet at a time. Buy a devise that allows you to have two mags side by side, one is upside down this will allow you to have a loaded gun and you can flip the gun over and jam in two or three stripper clips in the empty mag (though not pretty duct tape will work). In a day of trouble whether you have an AK or SKS the stripper clip makes a gun into a true offensive weapon, functioning unrestrained from the fetters of single bullet loading.

 No matter which military gun you own there is generally a stripper clip and or a speed loader available.
 The SKS was placed on the ban list by the BATF except the curio and relic version the Yugo SKS with the grenade launcher attachment. Everyone is always talking about how good the AK 47 is but the SKS shoots more accurately and will offer less barrel lift with repeated or back to back discharges and has no flex in the receiver as the AK pressed metal receiver does when it is fired. The SKS is also said to offer 100 to 150 extra feet of muzzle velocity for each additional inch of barrel length over the AK47. Things are banned not because they are inferior but because they are better. End of part 7 of 12 to see the next post click here
Richard W Norman
  If there was ever a war then you will either make your supplies at home, salvage or do without. Below-- Bomb Shelter and Fall out Shelter All the designs were tested by the government and proved useful 1), 2) and 3) below each are the actual plans for home construction designed during the cold war. Eleven plans to chose from as well as Civil Defense manuals instructing you on how to survive nuclear war. Eleven  shelter plans to chose from  You can have them as e-books now as well as military and gun books over 70 titles to chose from. www.firstpatriotpress.com
Basement Concrete Block ShelterBelowground Clay Masonry Fallout Shelter PlansFamily Fallout Shelter

Ammo Application in Gun Function Part 6 of 12


 Part 6 A few examples of crossing webing ---1903 Springfield in caliber 30/06 and Indian A2 Ishapore Enfield in caliber 308, and the American Enfield in 30/06 use the same stripper clip so they can use the same webbing.
The above ammo pouch is a WWII collectible. It holds a canteen and is worn around the waste. The aftermarket new production models are about $25. The ammo represented above from left to right. 7.62 X 54 Mosin Nagant clip, 8MM Mauser, 30/06, and 308. This webbing is very desirable in new production products among shooters and the investment is relatively small.     
 The 1903 Springfield used a waist belt seen above; the same ammo pouch was used in two world wars. The pouch will hold two 5 round clips in each pocket. The waist belt has 10 separate pouch on the webbing waist band as described above with 2 clips in each pouch or 10 pockets  times 2 stripper clips  times 5 bullets each = 100 bullets. This means you would need at least a minimum of 20 stripper clips. This gun also used a canvas bandolier that was disposable and had a strap that slung over the shoulder this allowed a soldier to carry a lot more ammo and these bandoliers can be made out of inexpensive cloth. Any clip fed gun can use a bandolier to increase a soldier’s firepower in an emergency and is for our purpose simply a good way to store your ammo making it very usable if there ever was a time of trouble. In any case if you cannot afford the webbing you can produce the bandoliers.
The American Enfield
This gun also uses the 30/06 cartridge and the same webbing and stripper clip.
Indian A2 Ishapore Enfield
This gun uses the 308 NATO cartridges and the same webbing and stripper clip. This gun is perhaps the most misunderstood. The A2 was designed from the factory to shoot the 308 NATO cartridges. But the rumor is that the guns were re-chambered from surplus 303 British Enfield’s. Continuing with the rumor—since it was a rechambered 303 British Enfield the 308 bullet rattles down the oversized 313 barrel. The metal is too soft for the higher pressure 308 ammo and the gun can fail. (Some amateur gunsmiths may have rechambered some 303 to 308 look at the metal band behind the bolt and it should read A2.) The fact is the American over the counter cartridge bought at the store has a chamber pressure 20,000 pounds higher than the 308 NATO cartridges that the military uses. This gun is perfectly fine shooting military surplus 308 ammo or reloaded ammo at NATO chamber pressure and is a superior cast bullet gun. You should never use over the counter 308 ammo in this gun. The gun has a few other small correctible clip problems explained later in how to choose a company to buy a clip from.       
The M1 Garand  
The clips for the M1 Garand holds 8 bullets the webbing for this gun was a holdover from WWI from the guns mentioned above and has 10 pouches that holds 10 clips so 10 X 8=80 bullets. You would need the webbing and at least 10 clips. Given that this gun uses a clip that is an integral part of the function of the gun most people will want as many clips as they can get to match their ammo storage. I stopped by a gun shop and these clips are also about $1 each but they can be as high as 10 for $24. In WWII this gun was said to be able to kill the enemy in the Black Forest in Germany when they were standing behind trees up to three feet thick with our men using armor piercing ammo which is not sold or available to the public anymore. None the less the hard ball copper jacketed 30/06 ammo has devastating penetration ability no matter which gun it is used in. End of part 6 of 12 To see the next post click here

 Richard W Norman 
If they pass laws against guns then you will either make your gun parts, bullets and supplies at home, salvage or do without. There is a gun and ammo supply system in a book “AmericanHandbook on Guns Ammo and Freedom”. This is a Book on home gun construction and repair, powder, primers; and a brief history of how the USA has moved toward socialism and their written plans to overthrow our freedom and some solutions to save the Constitution.